READ THE CONDITIONS

Knots, gusts and wind speed: read the number correctly

The conversion can be exact while the reading remains uncertain. Keep units, location, measurement period and gusts beside every wind number.

Kitesurfing on Lake Kinneret
Kitesurfing on Lake KinneretPhotograph by Maor X · CC BY-SA 4.0

The short version

  • One knot equals 1.852 kilometres per hour.
  • Mean and gust values need their provider’s definitions.
  • A precise conversion cannot establish a suitable kite or session.

A wind number without a unit, location and time is incomplete information. It is twenty could mean a forecast mean, a station gust or a handheld measurement in several different units.

Start by making the number comparable. Then examine how it was measured or predicted. That order prevents a clean conversion from hiding a poor comparison.

Convert the units

A knot is one nautical mile per hour. One international nautical mile is 1,852 metres, so 1 knot = 1.852 km/h, or approximately 0.5144 m/s and 1.1508 mph. The Met Office measurement guide explains wind units and observing context.

Knots Metres per second Kilometres per hour Miles per hour
5 2.6 9.3 5.8
10 5.1 18.5 11.5
15 7.7 27.8 17.3
20 10.3 37.0 23.0
25 12.9 46.3 28.8
30 15.4 55.6 34.5

Values are rounded to one decimal place. This is a conversion table, not a riding-range chart.

For example, a hypothetical 12 m/s measurement multiplied by 3.6 gives 43.2 km/h. Dividing 43.2 by 1.852 gives approximately 23.3 knots. The mathematics does not tell you whether that wind was steady, representative or appropriate for anyone’s equipment.

Distinguish mean and gust

Mean wind summarizes a defined averaging period. A gust uses a shorter interval or peak-related definition. The exact convention belongs to the provider and product.

The Met Office observing guide separates its observed quantities, while its forecast field guide explains predicted values. Do not assume a station report and an hourly app column are calculated in the same way.

A gust is not a constant speed you will experience for the entire hour. A mean is not a promise that stronger or weaker periods will be unimportant. Read both together with the trend and direction.

Ask where the instrument is

Wind changes with exposure, height, surface roughness and nearby obstacles. A sensor on a roof, a coastal station and a handheld meter beside a dune can report different situations without one of the numbers simply being wrong.

Reading Metadata worth checking Common comparison error
Handheld Position, height, exposure and sampling duration Treating a short beach reading as the whole riding area
Fixed station Location, instrument setup, time and averaging Assuming an inland station measures the launch
Forecast point Model, run, grid or site and valid period Calling the value a current observation
Marine forecast Area, issue time and product definition Applying a broad area directly to one sheltered bay

Check calibration and instrument guidance where relevant. Do not use a universal height correction to turn any convenient reading into a supposedly standard value.

Beaufort is descriptive context

Beaufort descriptions can help communicate wind conditions and observable effects. They are not a personal kite-selection scale. Water appearance also depends on depth, current, fetch, waves and other factors, so a visual impression cannot replace proper information.

Avoid converting a familiar sea appearance into an exact wind speed or a safe beginner range. An experienced local explanation can help interpret what you see, but it still needs the actual conditions and rider context.

The NWS marine FAQ explains marine forecast products and terminology. Their categories and warning purposes should not be renamed as kite equipment limits.

The same number can mean a different session

A steady-looking mean forecast and a highly variable observation are different evidence. Direction shifts, terrain and evolving weather can change the practical problem even when the mean values match.

Equipment also changes the interpretation. Ozone’s water-kite manual places use in the context of the actual equipment and conditions. A nominal kite area, rider weight and wind number cannot by themselves establish suitability.

Include board, kite model, ability, water state and local conditions when asking for sizing advice. Do not turn this conversion table into a calculator that declares the correct kite.

Share a useful wind report

Write the value and unit, whether it is mean or gust, provider or instrument, location, timestamp and relevant averaging period. Add direction and observed variability. If any field is unknown, say so.

A message such as station mean, knots, recorded at this time and location gives someone evidence they can interpret. A bare twenty gives them room to make the wrong assumptions.

Something changed?

Conditions, access and prices change. If something needs updating or correcting, tell us. Get in touch ↗