READ THE CONDITIONS

Tides and currents: read the right water information

A tide graph tells you about water level. It does not automatically tell you how quickly the water is moving through a channel or whether your launch works.

Kitesurfing on Lake Kinneret
Kitesurfing on Lake KinneretPhotograph by Maor X · CC BY-SA 4.0

The short version

  • Tide-height predictions and current predictions are different products.
  • High or low water does not universally coincide with slack current.
  • Keep station, datum, units and time convention attached to every value.

A high-water time is not a current forecast. A small tidal range is not proof of weak flow. A tide app can show useful information while leaving the most important local movement question unanswered.

Start by separating vertical water-level change from horizontal movement. NOAA’s explanation makes that distinction directly. Then identify which product you are actually reading.

Four different water products

Product What it describes What it does not establish alone
Astronomical tide prediction Predicted tidal water level under its assumptions Actual total observed level or local current
Observed water level A measurement at a station Conditions everywhere in the riding area
Current prediction Predicted horizontal movement at a defined location Current at every nearby channel or launch
Total-level or other marine forecast A specifically defined forecast product Whatever is not included in its stated scope

The NOAA FAQ distinguishes tide and current predictions. Do not assume a screen called tides supplies both merely because it also contains arrows or a coloured chart.

Read the metadata before the curve

Find station or location, date, units, height reference, issue or prediction details and the selected clock. Keep them with any copied number.

A height of two metres needs a reference elevation, or datum. NOAA’s datum guidance explains that references have defined meanings and geographic limits. A number cannot be moved to another station or compared casually with a chart using another reference.

Time matters just as much. Shom’s product notice distinguishes time options, including UTC and local/legal-time conventions. A saved screenshot can lose the clock setting that makes its times meaningful.

High water is not universally slack current

Slack current concerns weaker horizontal movement around a reversal. High and low water concern water-level extrema. The relationship between them depends on location and tidal behaviour.

NOAA’s FAQ explicitly warns against a universal relationship. A rule learned at one harbour should not be copied to another lagoon, river mouth or channel.

Do not draw a current-speed curve from a tide-height curve without a valid source for that relationship. The correct current product and local knowledge are separate requirements. If no appropriate prediction is available, keep that gap visible rather than assigning slack to the high-water timestamp.

Spring and neap describe a cycle

Spring tides are associated with the alignment of the Sun, Earth and Moon; neap tides with another part of the lunar geometry. The word spring is not a reference to the season. NOAA’s spring/neap explanation provides the conceptual background.

These cycles help explain tidal-range variation, but a label alone does not supply the current at a specific launch. Nor does the French tidal-coefficient convention become a universal current-speed scale. Read the actual product definitions and location.

Predicted level is not guaranteed actual depth

Weather and other factors can move actual water levels away from astronomical predictions. Shom’s notice describes relevant limitations.

Even a correct observed station level does not independently establish the depth over a particular sandbar, the condition of an access route or the current at an opening. Local bottom shape, waves, river flow and restrictions may also matter.

Do not convert a predicted height into a riding clearance without a competent current local assessment. A number may be precise while the practical conclusion remains uncertain.

Work a metadata exercise

Imagine a fictional tide screen showing a high-water time and a height, but no station, datum or timezone. Those missing fields stop a meaningful comparison with another screen, even before current enters the question.

A useful worksheet asks:

  • Which authority and product produced the information?
  • What station or area applies, and how does it relate to the actual launch?
  • What date, clock and units are selected?
  • What datum defines the height?
  • Is this a prediction or an observation?
  • Is there a separate appropriate current product?
  • Which local access, bottom and weather questions remain?

This exercise deliberately supplies no invented real-station values. It teaches the record you need to obtain from the responsible source.

Find the appropriate authority

Use the hydrographic service and official notices relevant to the location. Shom’s portal description explains its service and responsibility; broad coverage does not replace every country’s official role.

Check data-use conditions before reproducing tables or embedding products. Free viewing does not automatically grant unrestricted reuse. For your own session planning, preserve the full metadata and obtain a locally informed explanation of what the information means at the launch.

Something changed?

Conditions, access and prices change. If something needs updating or correcting, tell us. Get in touch ↗